Appendix U

Appendix U catgelogues 66 abrasion tests - considering such aspects as the principle of the test, its historic development, the apparatus illustrated with photographs, the abrasive, and the mechanisms of abrasion wear. Below 66 links are provided to the pdf files describing the 66 tests - see also chapter 4 for essential background information on the various tests.

Appendix U - PDF files:

To Appendix U.1.00 - General Notes (15 KB)
To Appendix U.1.01 - Fwa's Cube Tumbler (227 KB)
To Appendix U.1.02 - Cantabrian Paver Tumbler (202 KB)
To Appendix U.2.01 - Abrams's Tumbling Balls (244 KB)
To Appendix U.2.02 - PCI TM 7.8 (109 KB)
To Appendix U.2.03 - AS/NZS 4456.9 (108 KB)
To Appendix U.2.04 - SABS 541 (108 KB)
To Appendix U.2.05 - Impact Box (119 KB)
To Appendix U.2.06 - Horiguchi's Bouncing Balls (120 KB)
To Appendix U.2.07 - ASTM C1138 (1.1 MB)
To Appendix U.2.08 - EN 154 (P.E.I Test) (348 KB)
To Appendix U.2.09 - DIN51951 (224 KB)
To Appendix U.2.10 - Davis' Rolling Balls (672 KB)
To Appendix U.2.11 - Davis Modified Rolling Balls (226 KB)
To Appendix U.2.12 - ASTM C779 Proc. C (490 KB)
To Appendix U.2.13 - Ma20 (349 KB)
To Appendix U.2.14 - CCA : TM6 (351 KB)
To Appendix U.2.15 - MA20SA (313 KB)
To Appendix U.2.16 - CMA20 (180 KB)
To Appendix U.3.01 - Caterpillar Tracks (1.1 MB)
To Appendix U.3.02 - Chained Tyres (240 KB)
To Appendix U.3.03 - Norcem Studded Tyres (1.6 MB)
To Appendix U.3.04 - Finnish Studded Tyres (446 KB)
To Appendix U.3.05 - Japanese Studded Tyres (648 KB)
To Appendix U.3.06 - ASTM C779 Proc. B (289 KB)
To Appendix U.3.07 - C&CA Dressing Wheels (185 KB)
To Appendix U.3.08 - Smith's Dressing Wheel Abrasion Test (360 KB)
To Appendix U.3.09 - ASTM C944 (294 KB)
To Appendix U.4.01 - Finnish Steel Wheels (641 KB)
To Appendix U.4.02 - NT BUILD 044 (206 KB)
To Appendix U.4.03 - SP Swedish Steel Wheels (217 KB)
To Appendix U.4.04 - Ahlers'Steel Wheels (756 KB)
To Appendix U.4.05 - Fruchtbaum's Steel Wheels (110 KB)
To Appendix U.4.06 - C&CA Steel Wheels (405 KB)
To Appendix U.4.07 - Wastlund's Steel Wheels (380 KB)
To Appendix U.5.01 - Dorry Hardness (167 KB)
To Appendix U.5.02 - DIN52108 (370 KB)
To Appendix U.5.03 - NBN 269 (379 KB)
To Appendix U.5.04 - UNE 7015 (371 KB)
To Appendix U.5.05 - SI 6 (371 KB)
To Appendix U.5.06 - BS 812 (187 KB)
To Appendix U.5.07 - NBN B15-233 (360 KB)
To Appendix U.5.08 - NEN 2874 (359 KB)
To Appendix U.5.09 - ONORM 3232 (359 KB)
To Appendix U.5.10 - FBPM (635 KB)
To Appendix U.5.11 - NF P98 303 - (Capon Test) (140 KB)
To Appendix U.5.12 - PrEN 1338 (136 KB)
To Appendix U.5.13 - Schuman's Revolving Discs (413 KB)
To Appendix U.5.14 - Scripture's Revolving Discs (200 KB)
To Appendix U.5.15 - ASTM C779 Proc.A (266 KB)
To Appendix U.5.16 - C&CI TM 7.11 Grit Method) (517 KB)
To Appendix U.5.17 - Reciprocating Table (2 MB)
To Appendix U.5.18 - Drum Sander (324 KB)
To Appendix U.5.19 - NEN 7000 (692 KB)
To Appendix U.5.20 - Ruemelin's Shotblast (216 KB)
To Appendix U.5.21 - ASTM C418 (1.3 MB)
To Appendix U.5.22 - Water Sandblast (211 KB)
To Appendix U.6.01 - C&CA - Steel Pads (226 KB)
To Appendix U.6.02 - C&CI TM 7.11 (wire-brush) (368 KB)
To Appendix U.6.03 - NEN 7000 (wire brush) (533 KB)
To Appendix U.6.04 - Diamond Tip Scratcher (79 KB)
To Appendix U.6.05 - Mohs Scratch Hardness (37 KB)
To Appendix U.7.01 - BRE Screed Tester (60 KB)
To Appendix U.7.02 - Rebound Hammer (136 KB)
To Appendix U.8.01 - ISAT (42 KB)
To Appendix U.8.02 - ISAT (20 KB)
To Appendix U.8.03 - UPV (76 KB)

To Main Abrasion page

Back to Home page